Skip to main content

How to set up QL Player on Philips Android SoC devices

G
Written by Giuseppe

In this article, we will outline how to install and activate QL Player on Philips Android SoC displays that Navori has validated. Each Philips model uses its own signed Conductor APK, so please make sure you download the client listed for your model.

Requirements before you begin

Please make sure you have the following before you begin:

  • A valid QL Player licence

  • Network access from the display to your QL server, over Ethernet or Wi-Fi

  • The time zone correctly set on your Philips display

  • Your server address (for SaaS this is https://saas.navori.com, and for on-premise it is your own server’s DNS name or IP address)

  • The correct Conductor APK for your Philips model, as listed in this article

  • A USB drive, and a keyboard and mouse if your display has no touch screen

Locating and downloading the QL client

The Philips D Line 2021 (Android 8) client is available directly from your Navori server. To download it, please follow the steps below:

  • Log in to your Navori server (for SaaS users, the URL is https://saas.navori.com, and for self-hosted users, it is your own server’s DNS name or IP address)

  • Click the Settings button in the top right-hand corner, then select Player Management > Download QL Player

  • Locate Philips D Line 2021 - Android 8 in the list and click Download in the Installer column

What if my Philips model is not listed on the Download QL Player page?

The table below lists the latest signed client for every other validated Philips model:

Preparing your Philips display

Before installing the client, please follow the steps below on the display itself:

  • Enter Admin Mode using the remote control Home, 1, 8, 8, 8

    bfe90d5f-d904-45d4-b503-93abefd2e28a (858×279)
  • Click Settings

  • Set the correct time zone, then connect to your network over Ethernet or Wi-Fi

  • Set Power Save to Mode 3, so that QL can switch the screen on and off as scheduled

Installing QL Player on your Philips display

With the correct Conductor APK downloaded, please follow the steps below:

  • Copy the Conductor APK to a USB drive and insert it into the display

  • On the display, navigate to the storage area, find your USB drive and select the Conductor APK to install it

Please Note

If prompted, allow the Navori Conductor app to install unknown apps. As part of the installation, the Conductor app installs the Navori Engine app, which is required for your content to appear on screen.

Once installed, the Conductor app opens straight to the Player Activation page.

Activating QL Player

Activation on a Philips display is the same as on any other Android device. You can use either Simplified Mode or Advanced Mode, as outlined in How to set up QL Player on Android devices (Generic).

Once activated, the display restarts and shows the default media, and the player appears on your server, ready for you to publish content.

Device-specific notes and known limitations

The table below lists the known limitations of each validated model. For full playback limits, please refer to Understanding the Content Checker for Hardware Compatibility in Navori CMS.

Device

Known limitations

D Line 2021 (BDL4550D)

Requires firmware FB01.04. Disable hardware acceleration, and set the technical profile software update to disabled to prevent downgrades. H.264 and H.265 supported up to Full HD 60fps (no 4K). Portrait not supported. No HDMI input. Up to 3 videos and 300 objects per template, at a maximum of 20 Mbps.

BDL4650D

H.264 supported up to Full HD 60fps, and H.265 up to 4K 60fps. No HDMI input. Up to 2 videos and 300 objects per template, at a maximum of 30 Mbps.

BDL5050D

H.264 and H.265 supported up to 4K 60fps. No HDMI input. Up to 8 videos and 600 objects per template, at a maximum of 30 Mbps.

T-Line (10BDL4151T)

H.264 and H.265 supported up to Full HD 60fps (no 4K). No HDMI input. Up to 3 videos and 300 objects per template, at a maximum of 15 Mbps.

D-Line 2019, T-Line 3051

Marked end of life by Philips. QL Player still runs on these models, but we recommend newer Philips models for new deployments.

You can find setup guides for other devices in How to set up QL Player on Android devices (Generic), and you can contact our Support Team if you require further assistance.

Did this answer your question?