In this article, we will outline how to install and activate QL Player on BrightSign players that Navori has validated, along with a few optional configuration steps and the known limitations of each model.
Requirements before you begin
Please make sure you have the following before you begin:
A validated BrightSign player (see Supported BrightSign models below)
The latest validated firmware for your model, as listed below
A Class 10 micro SD card formatted to exFAT (we recommend purchasing this through BrightSign)
A computer on the same network as your BrightSign player
Your server address (for SaaS this is https://saas.navori.com, and for on-premise it is your own server’s DNS name or IP address)
An available QL Player licence
Supported BrightSign models
The table below lists every BrightSign model validated with QL2, along with the latest firmware version we have validated it on:
Series | Model | Latest validated firmware |
Series 6 | XD6 | 9.1.92 |
Series 6 | HD6 | Coming Soon |
Series 6 | XS6 | 9.1.92 |
Series 5 | XT5 | 9.0.101 |
Series 5 | HD5 | 9.0.101 |
Series 5 | XD5 | 9.0.75 |
Series 5 | LS5 | 9.0.59 |
Series 5 | XC5 | TBC |
Series 5 | HS5 | 9.1.140 |
Series 4 | XT4 | 8.0.127 |
Series 4 | XD4 | 8.0.127 |
Series 4 | HD4 | 8.0.127 |
Series 4 | LS4 | 8.0.127 |
Please Note
BrightSign Series 3 players (XT1143, XD1033, HD1023 and HS123) are not supported with QL2.
1. Preparing your BrightSign player
To check your player’s details, please follow the steps below:
Power on the player without the SD card inserted, and note the IP address, Device Serial Number and firmware version shown on the screen
If your firmware does not match the version listed above, download the correct firmware from BrightSign, copy the file to the root of the SD card, insert it and reboot the player (once the upgrade completes, power off, remove the SD card and power on again to confirm the new version)
If your player has been used before, open the DWS portal and run a factory reset from the Control tab before continuing (see Accessing the BrightSign DWS portal below)
2. Preparing your files and installing QL Player
With your player on the correct firmware, please follow the steps below:
Log in to your Navori server, click the Settings button in the top right-hand corner and select Player Management > Download QL Player
Download the BrightSign installer and extract it to the root of your SD card (you should now see autorun.brs and a file named NavoriQLPlayer.zip; do not extract this second ZIP)
Insert the SD card into the player and power it on
3. Activating your player
Manual Activation
After following the steps in the previous section, you should now see the QL2 activation page. Connect a USB keyboard to the player and complete each of the required fields.
Use the Tab key and the space bar to navigate through and complete the required fields.
Once your player has activated, you will see a cloud image on the display, and your player will appear as activated in your Navori server, ready to receive content.
Top Tip
Advanced Mode allows you to enter the exact licence number from your Navori server to activate your player against.
Simplified Mode allows you to enter your Navori server username and password, and a licence is selected for you automatically.
Neither of the above activation processes is right or wrong; this is simply a matter of preference.
Auto-Activation
You also have the option to auto-activate your device, bypassing the Activation page altogether. You can do this by adding an activation.json file to the root of the SD card, with the exact server URL and licence number pre-filled. Auto-activation only works during a fresh installation from the SD card, and is not available when QL Player is deployed through BrightAuthor. To do this:
Download this example activation.json file, unzip it and open it in a text editor such as Notepad
Replace the serial number and server URL with your available player licence number and your own Navori QL Server URL, then save the file with the .json extension (make certain the file does not have a .txt extension appended to its name)
This would look something like this:
{ "serialNumber": "65Fxx-E1Exx-0F1xx-9CExx-A24xx-4CBxx-29Axx", "serverURL": "https://saas.navori.com/" }
Once you have a completed activation.json file, simply add it to the root of your SD card, alongside autorun.brs and the NavoriQLPlayer ZIP, and reboot your player. The device will then auto-activate.
Once your player has activated, you will see a cloud image on the display, and your player will appear as activated in your Navori server, ready to receive content.
Accessing the BrightSign DWS portal
All the steps covered in this article can also be performed via the BrightSign DWS portal. To access it, your computer must be on the same network as the BrightSign device, and you will need the device's IP address and Device Serial Number.
Open your chosen web browser on your computer and enter the IP address, then log in with the username admin and your device serial number as the password (for example, D3E8CA000973)
Once logged in, head to the SD tab, then work your way through the steps earlier in this article to ensure your device is running the correct firmware and has all of the relevant QL Player installation files
You can reboot the player from the DWS portal at any time from the Control tab
Optional configuration
Reactivating with a new serial number or server
To change the licence or server URL on an activated player, open the DWS portal, select Disable Autorun on the Diagnostics tab, format the storage as exFAT, then repeat steps 2 and 3.
Hiding the mouse cursor
Open autorun.brs in a text editor, change tScreen.EnableCursor(1) to tScreen.EnableCursor(0) and save the file. Then disable autorun, format the storage, upload your files from the SD tab and reboot the player from the Control tab.
Setting the time zone on devices without a standard USB-A port
For models without a standard USB-A port (such as the LS424), you can set the date and time zone by uploading a small set of files to the SD card. To do this, please follow the steps below:
Download this package (this contains 3 files: an autorun.brs + resources.txt + setDateAndTime.txt)
Unzip the package and open the setDateAndTime.txt file in a text editor
Modify the first 2 rows to match your time zone, follow the format below (or refer to screenshot below):
LINE 1 = TIMEZONE CET
LINE 2 = DATETIME YYYY/MM/DD HH:MM
Once completed save the txt file, your file will look something like this:
With these steps completed:
Disable autorun and format SD card
Upload all package content (including the setDateAndTime.txt you just altered) onto the SD card of the device
Reboot your BrightSign
Device-specific notes and known limitations
The table below lists the known limitations of each validated model. For full playback limits, please refer to Understanding the Content Checker for Hardware Compatibility in Navori CMS.
Device | Known limitations |
XD236, XD1036 | No HDMI input. Up to 8 videos and 600 objects per template, at a maximum of 30 Mbps. H.264 and H.265 supported up to 4K 60fps. |
XS156 | No HDMI input. Up to 1 video and 200 objects per template, at a maximum of 15 Mbps. H.264 supported up to 4K 60fps, and H.265 up to 4K 30fps. |
XT5 | Up to 3 videos and 200 objects per template, at a maximum of 20 Mbps. H.264 and H.265 supported up to 4K 60fps. HDMI input supported. |
XD5 | Portrait not supported. Up to 3 videos and 200 objects per template, at a maximum of 20 Mbps. H.265 supported up to 4K 60fps, and H.264 up to 60fps. HDMI input supported. |
HD5 | Up to 1 video and 200 objects per template, at a maximum of 15 Mbps. No 4K H.264. H.265 supported up to Full HD 30fps. No HDMI input. |
LS5 | Not recommended for templates with video. Up to 50 objects per template, at a maximum of 10 Mbps. H.264 and H.265 supported up to Full HD 30fps. |
XC2055, XC4055 | Multi-output is supported on Windows only. |
Series 4 (portrait) | Portrait output up to 1080x1920 at 60p. On HD models, source content must be 30p or lower. On the LS424, H.265 only, up to 1080p30. |
LS424 (older units) | Units without the built-in clock battery lose their date and time on power cycle, and may show default media or a black screen after rebooting without an internet connection. |
You can find more BrightSign features, such as keyboard triggers, in BrightSign Trigger, and you can contact our Support Team if you require further assistance.




